Paslode Impulse / Spit Pulsa Cleaner

Product Information

The type of maintenance required will vary, depending on the type of nail gun. Pneumatic tools require a little extra maintenance than cordless or electric models. Maintenance for Pneumatic Nail Guns

Nail Gun Maintenance 101: Tips for Cleaning and Lubrication

Hosing is what supplies the nail gun with the power it needs to run smoothly. The quality and state of the hose will affect the amount of pressure exerted.

Your Basket

Here are some great options if you’re looking for an equally powerful but cheaper Paslode degreaser cleaner alternative.. Paslode degreaser cleaner alternative – 2 recommended options that work as well Battery inspections should be performed regularly, particularly if the nail gun isn’t holding a charge as well as it used to. Cleaning Don’t think of carb degreaser cleaner though- it has some terrible ingredients and hardens or dissolves plastic, rubber, and the like. Spray the cylinder head assembly liberally and get rid of the gunk with lint-free cloth/ compressed air. While holding the air hose connector in an upright position, add few drops of the recommended oil through the air inlet port and re-connect your machine to the air hose. Pull the trigger several times to help spread the oil throughout the machine.

How to Clean a Paslode Nail Gun - Kelvin Power Tools Blog

That said, avoid using a brake pad cleaner or any other unofficial cleaner if you’re still within the warranty period -it will void it. Pneumatic oil is the most preferred, but you’ll need to consider nail gun operating temperature and the climate for efficiency. This simply means that nail gun oil for winter should be different from that of summer. The type of lubricant you choose for your nail gun is crucial as some lubricants may not work with nail gun components, especially rubber parts. For example, oils such as WD-40 should be avoided as they are not only ineffective but also speed up the death of your unit. #6. Lubricating your nail gun Be sure to also apply oil to the air fitting each day (about 4-5 drops). Inside of the air fitting are O-rings, which should be lubricated using a finger. Each nail gun brand will have its own recommendations for cleaning, which will be included in the user manual.

How to clean a paslode nail gun with brake cleaner for paslode

Do not put off tightening screws and bolts. A missing screw or bolt can make it difficult to maintain control of the gun, which can be dangerous. Battery Inspection (Cordless)